Maintenance and maintenance of rotary shear

Rotary shear is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, cold shearing, pressing and flanging of various shapes of steel and various metal materials, as well as powdered products, plastics, glass fiber reinforced plastics, and insulating materials, Rubber compression molding. So how to maintain and maintain the rotary shear? Let's take a look together next.

This is the content list:

Daily maintenance and maintenance

Weekly maintenance and maintenance

Monthly and quarterly maintenance

Daily maintenance and maintenance

1. Every working day must clean up the dirt of the rotary shear machine tool and guide rail to keep the machine bed clean, turn off the air source and power supply when off work, and drain the remaining air in the machine tool tube belt at the same time.

2. If you leave the rotary shear for a long time, turn off the power to prevent non-professional operation.

3. Pay attention to whether there is lubricating oil on the surface of the horizontal and longitudinal guide rails and racks of the rotary shear to keep them well lubricated!

Weekly maintenance and maintenance

1. The rotary shear shall be thoroughly cleaned weekly, the horizontal and vertical guide rails, the transmission gear rack shall be cleaned, and the lubricating oil shall be added.

2. Check whether the horizontal and vertical rail wipers of the cardboard rotary shear work normally, and replace them in time if they are abnormal.

3. Check whether all the cutting torches of the electric rotary shear are loose, clean up the rubbish of the ignition muzzle, and keep the ignition normal.

4. If there is an automatic height adjustment device, check whether it is sensitive and whether to replace the probe.

5. Check whether the plasma cutting nozzle and electrode are damaged and whether the cutting nozzle and electrode need to be replaced.

Monthly and quarterly maintenance

1. Check whether there is rubbish at the main air inlet of the rotary shear and whether each valve and pressure gauge is working properly.

2. Check whether all air pipe joints of the electric rotary shear are loose and all pipes are not damaged. Tighten or replace if necessary.

3. Check whether all the transmission parts of the cardboard rotary shear are loose, check the meshing of the gear and the rack, and make adjustments if necessary.

4. Loosen the electric rotary shear tightening device, push the pulley by hand, check whether it comes and goes freely, and adjust or replace it in time if there is any abnormality.

5. Check the rotation shear clamping block, steel belt, and guide wheel for looseness and tightness of the steel belt, and adjust if necessary.

6. Check the performance of all buttons and selector switches of the cardboard rotary shear, replace damaged, and finally draw a comprehensive inspection graph to test the accuracy of the machine.

The above is related to the maintenance of the rotary shear. If you are interested in rotating shear, please contact us. We will give you a detailed introduction. Our website is https://www.jeeleng.com/. We look forward to your visit and hope to cooperate with you.