Views: 68 Author: Qingdao Kaituo-nc Equipment Co., Ltd Publish Time: 2020-11-26 Origin: https://www.jeeleng.com/
No matter what you do to do what kind of work, safety is first and foremost in the first place. Cut off machine operation is the same, we have to pay attention to many matters when using and maintaining the machine, only pay attention to these matters we can avoid a lot of unnecessary trouble and potential danger. The next is an introduction to the cut off machine operation and maintenance precautions.
Here is the content list:
Precautions for use
Precautions for maintenance
Precautions for use
Note that the temperature of the cooling water should not be too different from the air temperature, CNC cut off machine lasers and optical lenses are used in the water cooling method, as the water in the air will condense into water dew when the cooling water temperature is lower than room temperature 5 - 7 degrees, the laser, and optical lens surface will have water dew condensation, which largely affects the efficiency of the laser and optical lens transmission, which can lead to laser energy loss and damage to optical accessories. Optical lens transmission will lead to laser energy loss and damage to optical accessories. We recommend that the majority of CNC cut off machine users set the water temperature of 30 - 32 degrees, control the cooling water temperature and room temperature difference of not more than 7 degrees.
Summer temperature rises, heavy duty cut off machine cooling system pressure increases, we recommend that before the arrival of high temperature to check the internal pressure of the maintenance cooler. Different manufacturers of equipment pressure are not quite the same, it is recommended to consult the specific parameters of the equipment manufacturer before maintenance.
Due to the high temperature in summer, the deterioration of the cooling water will also accelerate, it is recommended that cut off machine users use regular distilled water or pure water, and regularly clean up the scale, so as not to cause the laser and pipeline scale attached to affect the laser power. Different types of precision cut off machine clean up the scale is also different, please operate under the guidance of the equipment manufacturer.
As the dust of precision cut off machines is mainly metal powder, it is recommended to clean the dust inside the electrical cabinet of the automatic cut off machines and check the working condition of the cooling fan regularly.
Precautions for maintenance
Every six months to check the straightness of the cut off machine track and the verticality of the machine found abnormal timely maintenance and debugging. Otherwise, it is possible to affect the cutting effect, the error will increase, the quality of cutting down.
Check the steel belt often, and make sure to pull tight. Otherwise, there is a problem in the operation, there is a possibility of injury. The steel belt may seem insignificant, but it is not to be underestimated when something goes wrong.
Vacuum the dust and dirt inside the machine once a week, and all electrical cabinets should be closed tightly against dust.
The cut off machine of each rail should be cleaned frequently to exclude dust and other debris to ensure the normal operation of the equipment. The rack should be frequently wiped, add lubricant to ensure lubrication and no debris. The guide rails, as well as the motor, should be cleaned and lubricated frequently, so that the cut off machine can be better positioned in the march, more accurate cutting, cutting out the quality of the product will be improved.
Bifocal laser cutting head is a perishable item on the cut off machine, long-term use, easy to cause damage to the laser cutting head.
The above is the cut off machine operation and maintenance precautions, I hope this article can be helpful to everyone. As one of the cut off machine manufacturers, Qingdao Kaituo-nc Equipment Co's cut off machine is high-cost performance.
