Publish Time: 2020-09-25 Origin: https://www.jeeleng.com/
Rotary shear is a mechanical device used to cut metal materials. Brings a lot of convenience to our production and life, so what is the method of purchasing rotary shear? Let's take a look together next.
This is the content list:
Cutting accuracy
Cutting speed
The automatic layout optimization function
Easy to maintain
Save energy
Cutting accuracy
The cutting accuracy provided by various rotary shear vendors is generally below ±0.2mm, but this should not be based on the introduction of the rotary shear manual. There should be a complete set of cutting accuracy testing procedures during acceptance to measure the actual cut product accuracy. Whichever is the case, we generally have more than a dozen test samples. Through the test, we can fully grasp the flatness of the cutting platform and the synchronization control level of the control system.
Cutting speed
We can talk about the rotary shear speed only when the cutting accuracy is met. Because the rotary shear cutting platform is short, it is difficult to judge whether the maximum speed is reached with the eyes. We can use the software simulation function of the servo drive of the cutting machine to check the motor Whether the speed reaches the maximum. When testing the cutting speed, do not use real cutting, increase the acceleration and deceleration. Each axis can be tested separately or at the same time.
The automatic layout optimization function
On the side of the rotary shear, taking into account the processing cost and the particularity of the work type, generally will not arrange for highly educated people to do it. This requires the operation of the rotary shear to be simple, easy to understand, and not too complicated, otherwise it will cause an embarrassing situation where one can afford a machine and cannot support a machine. The electric rotary shear is best to avoid defects because there are sometimes defective products in the domestic bottom glass. The graphics library for special-shaped cutting should be more and flexible so that the graphics made by CAD can also participate in typesetting.
Easy to maintain
The rotary shear signal and mechanical sensors should not be equipped with too many, and unnecessary switches and indicators should be as few as possible, because once a certain component on the electric rotary shear fails, it will affect the use of the cutting machine, and the failure probability of fewer components will below. There is also less wiring, which is convenient to find faults and replace parts. It is best to debug the status of each I/O signal on the screen. The maintenance cost of corrugated rotary shear is an important factor that must be considered when purchasing a machine.
Save energy
When the rotary shear cutting size requirements can also be completed, choosing the energy-saving corrugated rotary shear will bring many benefits to the enterprise. One is to protect the environment and save energy; the other is to save the daily expenses of the enterprise.
The above is the relevant content about the purchase method of rotary shear. If you are interested in rotary shear, you can contact us. Our website is https://www.jeeleng.com/.